Why is the coffee flowing from the edges of my Victoria Arduino coffee machine?
Is coffee flowing out the side of your Victoria Arduino portafilter causing you distress? This blog post offers valuable advice, specific to Victoria Arduino coffee machines, to help you fix this issue and get back to enjoying your perfect espresso. Let’s delve into these key tips!
Clean the Upper Edge of the Portafilter Before Engaging It
Coffee grounds can accumulate on the upper edge of the portafilter, causing an improper seal and leading to coffee flowing out the side.
Practical Tips:
- Wipe the upper edge of the portafilter with a clean, damp cloth to remove any coffee grounds.
- Make it a habit to clean the portafilter edge every time you prepare a new espresso shot.
Need a new machine for your office? Check out our top 10 machines for offices
Ensure Portafilter Is Properly Engaged and Not Loose or on an Angle
A loose or improperly engaged portafilter can cause coffee to flow out the side.
Practical Tips:
- Make sure to insert the portafilter into the group head straight and evenly.
- Firmly engage the portafilter by turning it until it is snug, but avoid overtightening.
Clean the Seal (Operation to Be Performed When the Machine Is Cold)
A dirty seal can prevent a proper seal between the portafilter and group head, causing coffee leakage.
Practical Tips:
- Turn off and unplug the coffee machine, allowing it to cool down completely.
- Use a small brush or cloth to gently clean the seal, removing any coffee residue or oils.
More from Caffeine Infused: Victoria Arduino Coffee Machine Flowing Slowly and Producing Dark Crema
Ensure Filter Basket Is Not Overfilled
An overfilled filter basket can cause uneven pressure during extraction, leading to coffee flowing out the side of the portafilter.
Practical Tips:
- Use a scale to measure the appropriate amount of coffee grounds (usually around 18-20 grams for a double shot).
- Level the coffee grounds evenly across the filter basket before tamping.
More from Caffeine Infused: Why is the Steam Not Coming Out of My Victoria Arduino Coffee Machine?
Replace the Seal
A worn or damaged seal can cause coffee to flow out the side of the portafilter.
Practical Tips:
- Inspect the seal for signs of wear, such as cracks, stiffness, or uneven surfaces.
- Replace the seal with a genuine Victoria Arduino replacement part to ensure compatibility and performance.
More from Caffeine Infused: Quieting a Noisy Water Pump in Your Victoria Arduino Coffee Machine
Contact Victoria Arduino Customer Support
If you’ve tried all the tips above and are still experiencing coffee flowing out the side of your portafilter, it’s time to get in touch with Victoria Arduino customer support for further assistance.
Practical Tips:
- Reach out to Victoria Arduino via their website or customer service phone number.
- Provide details about your specific machine model and the issue you’re experiencing.
- Follow the guidance provided by Victoria Arduino’s customer support team.
Conclusion
By following these practical tips and solutions, you’ll be well on your way to fixing the issue of coffee flowing out the side of your Victoria Arduino portafilter. Keep your coffee machine clean and well-maintained, and you’ll be enjoying perfect espresso shots in no time!
More from Caffeine Infused:
Addressing Hot Water Issues in Your Victoria Arduino Coffee Machine
Troubleshooting Cold Coffee from Your Victoria Arduino Coffee Machine
Addressing Espresso Flow Issues with Your Victoria Arduino Coffee Machine
Why Your Victoria Arduino Coffee Machine May Not Be Turning On: Causes and Solutions
Master the Art of Descaling Your Victoria Arduino Coffee Machine: A Comprehensive Guide
Coffee Machine Tips and Guides 
Leave a comment